Step 1: Vacuum or wipe off any loose toner on magnetic roller.
Step 2: Open can containing Black Mag. Roller Renew. Put cotton ball over opening and shake can upward so that cotton ball comes in contact with liquid. Important put lid back on can immediately otherwise liquid will evaporate.
Step 3: Apply Black Mag. Roller Renew in one direction along the axis of the roller. Rotate cotton ball so that a damp clean area of the ball comes in contact with the roller with each stroke.
Step 4: Go around the entire roller as in step 3.
Home | Color Cartridge Prices | Color Instructions | Customer Comments | Doctor Blade Renew | Black Mag Renew | IBM/Lex Dev Roller | PCR Polycoat | OPC Polycoat | Silver Mag Renew | PCR UltracoatStep 5: When finished there should be no residue on roller so it is not necessary to wipe roller again.